Earthquake-resistant structures

The Sidekick

From a simplistic point of view, places an earthquake, a lateral load of a building. So in addition to making a bridge, building or other structure, capable of gravity through the weight of the structure and content, a structure earthquake-proof, resistant force caused a significant aspect of this is due to the pair of walls done , floor, roof and foundations in a rigid box.

Earthquake & Tsunami In Japan

Masonry Woes

The worst building in a earthquakeViewed from the non-reinforced masonry, like brick or concrete blocks is established. In general, the walls are made of bricks stacked on each other and held with mortar. The roof will be wood or steel beams at the top of the wall move. The roof is the weight down through the wall to do the basics. If the nature of the construction is sideways jerk, overturn the crumbling brick walls or the roof falls on the occupants as a deck of cards. Since this type ofStructure is prevalent in poorer countries, the number of people killed by the earthquake many times greater than those posed to strict building standards, such as Japan or California.

Fundamentally Strong Foundation

As buildings got bigger the challenge becomes more difficult. The good performance of the building and the land must be considered. For example, even when the building is very strong, the basis for the reliability of sinking or capsizing of the pay leaderStructure. A classic example occurred during the 1964 earthquake in Nigata, Japan. Residents Kawaguchi-cho toppled like a row of dominoes. The buildings themselves were super strong and intact, but their bases are not the earthquake of the counter. Although 2,000 homes were destroyed, only 28 people killed in the earthquake. Therefore, building codes certainly saved many lives.

Earthquake-resistant structures